Drywall Repairing Tape

Drywall Repairing Tape is a kind of fiberglass products coated with acrylic copolymers and divided into different widths and lengths. Glass fibers are chemically stable and do not easily oxidize. Therefore drywall repairing tape widely used in wall renovation and decoration. It can be applied to wall crack repair, hole and gypsum board joint treatment. Building materials such as gypsum board and cement can also be bonded to prevent cracks in building materials. In addition, drywall repairing tape can be combined with other materials to enhance the toughness and tensile strength of composite materials, so as to achieve the purpose of strengthening crack prevention. 

Features

Good alkali resistance

Self adhesive and Good bond strength

Uniform grid

High tensile strength and resistance to deformation

operation is simple, convenient, and the construction is easy

Specification

Cell Size: 3mm×3mm, 2.85mm×2.85mm

Density: 65±3g/m2,75±3g/m2

Width/roll: 50mm, 48mm or customized

Length/roll: 90m, 75m, 55m or customized

Color: White, Yellow, Orange, Blue, Black or customized

Packaging & Loading

POF shrunk. PVC shrunk. PE bag packing. OPP bag packing are the four main inner packing, then Each roll with two round stickers(sticker can be customized), then shrunk wrapped and put into the cartons, 24 rolls/carton. 

Inner packing

Carton packing

Pallet packing

Loading

Application

Step 1: Keep the walls clean and dry

Step 2: Put the drywall repairing tape over the crack and press it tight

Step 3: Make sure the gap is covered with tape, then use a knife to cut off the excess tape, and finally brush with mortar

Step 4: Let it air dry and then gently polish

Step 5: Fill in enough paint to make the surface smooth

Step 6: Cut out the leaking tape and make sure all the cracks have been properly patched up. Use a fine composite to sew around the decoration, leaving it shiny and fresh