Construction Drywall Joint Fiberglass Tape

Fiberglass Mesh Tape

Fiberglass self-adhesive mesh tape, is a kind of fiberglass mesh as basis material coated with adhesive glue,then cut into the required sizes. It is widely used for reinforcing wall surfaces in buildings, repairing the cracks and joints of drywall,plaster board and other wall surface.and it is the ideal material for dry wall and ceiling problems.

-Good performance of alkalin-resistance

-High tensile strength and deformation resistance

-Excellent self-adhesive performance

-Well arranged

-Simple and easy to be applied

Application Method:
1. Kept wall clean and dry.
2. Attach tape in the cracks and compression.
3. Confirmed that gap has been covered tape, then use a knife to cut off it, at last brush on the plaster.
4. Let it nature dry, then gently polishing.
5. Fill enough paint to make it smooth
6. Leaked tape removed. Then, pay attention to all cracks are properly repaired, with subtle seam of composite materials will complement the surrounding modified to make it bright and clean as new.

Main properties:

1) Mesh size: 8x8 mesh,9x9 mesh

2) Width: 50mm, 100mm, 150mm, 200mm ect as per customers' requirement

3) Length of roll: 20m,45m,90m ect

4) Colors: white,yellow,blue,green ect

5) Main size: 50mm x 90m, 50mm x 45m, 50mm x 20m