Self Adhesive Fiberglass Tape

Description

Fiberglass Drywall Joint Tape (also called self-adhesive fiberglass tape) is made of fiberglass mesh that is coated with adhesive latex.It's the most ideal material for cracks repairing on the drywall,and joints strengthening on the ceilings,gypsum boards,ect.

Application:

Fiberglass Drywall Joint Tape comparing to the paper tape which is widely used on the market,its much easier to use, no bubbles or blisters,and can be applied directly to the wall surface without pre-embeding required.

Its tensile strength is up to 600N/50mm which is much stronger than paper tape.adapt to any commercial or residential application of drywall finishing repairing the cracks and joints or holes of drywall, plasterboard, stucco and the other surface.

Performance include:

---------Good alkali resistance
---------High tensile strength and resistance to deformation
---------Excellent self-adhesiveness
---------Good smoothness
--------Convenient application in construction

Specification:

Width (mm): 48,50,75,84,90,100,1000,1220
Length (m): 10, 20, 30, 45, 50,70,90, 100,1000
Mass: From 55 to 85g/sq. Meter.
Mesh: 8x8 or 9x9mesh/inch.
Colour: White, yellow, blue etc...
Jumbo roll: 1220mm X 100 m or 1000m
Drywall seaming tapes as well as private label and unlabeled tapes.
Each roll is shrink-wrapped, or plastic hand bag.
Other specification are available upon request.

How to use:

1. Wall must be clean and dry;
2. Center and apply tape over the length of the joint and pressing firmly;
3. Apply a generous first coat of compound over the tape and through the mesh, making sure to completely fill the joint crevice. When the joint has been completely filled, wipe off any excess compound with the drywall knife leaving enough to cover the tape.
4. Let dry completely, then sand slightly.
5. Apply sufficient thin finishing coats to produce a smooth wall surface.
6. Cut of butted boards do not have a tapered edge. Therefore, special care must be taken to assure proper compound penetration of all joints. This may result in slight build-up of compound that will require an increased amount of edge feathering.

Product Display 

RFQ

Q1: Are you factory or trading company?
We are manufacturer professional in fiberglass products. Jiangxi Ming Yang Fiber Glass is mainly responsible for export business.

Q2: What's your products ranges ?
1.Fiberglass yarn (E glass, C glass, Texturized yarn);
2.Fiberglass mesh & self-adhesive mesh tape;
3.Industrial fabric & texturized fabric;
4.Coated woven
5.Finished product (fire blanket & filter bag and others)

Q3: Can you supply the sample?
Yes, we can. We could supply small sample free at first time.
Freight collect.

Q4: Do you pass some factory audit or get any certification?
We are gold supplier of Made-in-China and get BV certification.
Our products have passed RoHS and we are willing to

Q5. What is your packing?
It depends on products and your requirement.
1.Nude pack: PVC bag;
2.PVC bag with pallet;
3.Carton with pallet;If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q6. What is your terms of payment?
30-50% T/T in advance, balance before delivery/against the copy of B/L. We'll show you the photos of the products and packages before you pay the balance/delivery.