Introduction
Fiberglass self-adhesive mesh tape is a self-adhesive, high tensile strength tape. The special adhesive coating allows drywall tape to outperform other joint sealing methods, particularly in areas of high humidity. Perfect for joints, cracks, and holes on a variety of surfaces including smooth and unevenly coated surfaces. Widely used in gypsum board, cement board, drywall, and EPS joint and reinforcement. We have a market in Europe, the Middle East, Southeast Asian, and South American Countries.
Characteristics
1. Strong Fiberglass Mesh Strengthens Joints
2. Mesh Design Eliminates Bubbles and Blisters
3. Good performance of alkaline-resistance
4. High tensile strength and deformation-resistance
5. Excellent self-adhesive performance
6. Full Assortment of Roll Sizes, Styles, and Colors
7. For Use With Setting-Type Joint Compounds and Plaster
8. No need to apply a primer in advance, quick to use and easy to apply
Specification
|
Self-adhesive Fiberglass Mesh Tape |
||||||||
|
1. Excellent self-adhesive, High deformed resistant |
||||||||
|
Category |
Specification |
Density Count/25mm |
Unit Weight g/m² |
Tensile Strength ≥N/5cm x 20cm |
Woven Structure |
Content Of Resin% |
||
|
Warp |
Weft |
Warp |
Weft |
|||||
|
Standard |
DWT50-8x7 |
8 |
7 |
55 |
500 |
450 |
Leno |
28±2 |
|
DWT60-7x8 |
8 |
8 |
60 |
500 |
500 |
Leno |
28±2 |
|
|
DWT65-9x9 |
9 |
9 |
65 |
550 |
550 |
Leno |
28±2 |
|
|
DWT70-9x9 |
9 |
9 |
70 |
550 |
600 |
Leno |
28±2 |
|
|
DWT75-9x9 |
9 |
9 |
75 |
550 |
650 |
Leno |
28±2 |
|
|
Extra thin |
DWT75-20X10 |
20 |
10 |
75 |
700 |
700 |
Leno |
28±2 |
|
High strength |
DWT110-5X5 |
5 |
5 |
110 |
1000 |
1000 |
Leno |
28±2 |
Width: 50mm-1240mm
Weight: 60g/m2-110g/m2
Mesh size: 8x8/inch, 9x9/inch, 12x12/inch, 20x10/inch
Popular Specification:8x8-65g/m2 9x9-65g/m2 9x9-75g/m2
Standard Size:5cmx20m, 5cmx45m, 5cmx90m, 5cmx150m
Construction method:
1. Keep it clean and dry.
2. Put tape on the cracks and press tightly.
3. Make sure that the gap is covered by tape, then use a knife to cut off the excess tape, and finally brush with mortar.
4. Let it air dry, then lightly sand.
5. Fill enough paint to make the surface smooth.
6. Cut off the leaking tape. Then, pay attention that all the cracks have been properly repaired, and use fine composite materials to modify the surrounding area of the joints to make it as clean as new.
Customized:
1. Label: Could be customized, Free design
2. Fiberglass drywall joint tape: Color, Size
3. Paper tube: Could be customized, Free design
Hot Tags: 50mmx90m strong adhesive mesh tape, China, suppliers, manufacturers, factory, customized, cheap, low price, made in China, gypsum board tools, Plasterboard Tape, fiberglass mesh tape for cracks repairing, Gypsum Joint Tape, Drywall Joint Tape, 8 8 65g fiberglass mesh tape
